In a production environment, infrastructure devices are commonly accessed remotely using Secure Shell (SSH) or HyperText Transfer Protocol Secure (HTTPS). Console access is really only required when initially configuring a device, or if remote access fails.
Console access requires:
- Console cable – RJ-45-to-DB-9 console cable
- Terminal emulation software – Tera Term, PuTTY, HyperTerminal
The cable is connected between the serial port of the host and the console port on the device. Most computers and notebooks no longer include built-in serial ports. If the host does not have a serial port, the USB port can be used to establish a console connection. A special USB-to-RS-232 compatible serial port adapter is required when using the USB port.
The Cisco ISR G2 supports a USB serial console connection. To establish connectivity, a USB Type-A to USB Type-B (mini-B USB) is required, as well as an operating system device driver. This device driver is available from http://www.cisco.com. Although these routers have two console ports, only one console port can be active at a time. When a cable is plugged into the USB console port, the RJ-45 port becomes inactive. When the USB cable is removed from the USB port, the RJ-45 port becomes active.
The table in Figure 1 summarizes the console connection requirements. Figure 2 displays the various ports and cables required.